Add report functionality to output the calculation results

report.py

@@ -0,0 +1,77 @@
+from coefficients import RHO_CP_AIR
+from ventilation import Room
+from interfaces import Interface, Surface
+
+
+def infiltration_losses(area, v50, reduction_factor=20):
+    # TODO: review factor 20 vs factor 25 reduction. I think factor 20 is used for
+    # dimensioning the required input and 25 for average use calculations
+
+    # Infiltration losses
+    flow_rate = (v50 / reduction_factor) * area / 3600  # m^3 / s
+    HV_inf = RHO_CP_AIR * flow_rate
+    return HV_inf
+
+
+def ventilation_losses(rooms: list[Room], eta) -> float:
+    sum_wet = 0
+    sum_dry = 0
+
+    for room in rooms:
+        if room.is_wet:
+            sum_wet += room.flow_rate
+        else:
+            sum_dry += room.flow_rate
+    flow_rate = max(sum_dry, sum_wet) / 3600  # m^3 / s
+    HV_act = RHO_CP_AIR * flow_rate * (1 - eta)
+    return HV_act
+
+
+def transmission_losses(interfaces: list[Interface]) -> float:
+    print(" - Transmission loss contribution by part:")
+    for interface in interfaces:
+        if isinstance(interface, Surface):
+            print(
+                f"   - {interface.name:16s} U = {interface.U:4.2f} W/m²K     HT = {interface.HT:4.1f} W/K"
+            )
+    HT = sum(interface.HT for interface in interfaces)
+    return HT
+
+
+def report(situation) -> None:
+    name = situation["name"]
+    rooms = situation["ventilation_rooms"]
+    eta_vent = situation["ventilation_eta"]
+    infiltration_area = situation["ventilation_v50_area"]
+    infiltration_v50 = situation["ventilation_v50_value"]
+
+    interfaces = situation["transmission_interfaces"]
+
+    delta_t_worst = situation["environment_delta_t_worst"]
+    delta_t_typical = situation["environment_delta_t_typical"]
+
+    print(f"Report for situation: {name}")
+
+    HV_inf_worst = infiltration_losses(infiltration_area, infiltration_v50)
+    HV_inf_typical = infiltration_losses(
+        infiltration_area, infiltration_v50, reduction_factor=25
+    )
+    HV_act = ventilation_losses(rooms, eta_vent)
+    print(" - Ventilation loss contribution by part:")
+    HV_tot = HV_inf_worst + HV_act
+    HV_tot_typical = HV_act + HV_inf_typical
+    print(f"   - Infiltration                        HV = {HV_inf_worst:4.1f} W/K")
+    print(f"   - Active ventilation                  HV = {HV_act:4.1f} W/K")
+
+    HT = transmission_losses(interfaces)
+
+    P_worst = (HV_tot + HT) * delta_t_worst
+    # FIXME: hacky way to do a less dramatic worst case to consider
+    P_worst2 = (HV_tot + HT) * 23
+    P_typical = (HV_tot_typical + HT) * delta_t_typical
+
+    print(f" - HV =         {HV_tot:7.1f} W/K")
+    print(f" - HT =         {HT:7.1f} W/K")
+    print(f" - P worst =    {P_worst:5.0f}   W")
+    print(f" - P worst2 =   {P_worst2:5.0f}   W")
+    print(f" - P typical =  {P_typical:5.0f}   W")